|
X2 Operations:
Unzip the files to the \[Mastercam
Root Dir.]\mill\ops
directory. and then start Mastercam.
In the operations manager "Right Click" and choose
import, when the pop up menu appears choose the operation you wish to do
from the drop down menu at the top of the page, then there
will be a list in each library for the sizes you need. When you pick the
operation you will have the choice to use all or some of the toolpaths, then
it will list the toolpaths in the operations manager and add the correct
tools to your current tool list.
|
|
Drill
And Ream |
Center Drill, Drill, Bore (On larger holes) and Ream for
most standard Dowel sizes. |
|
Drill
and C-Bore/Sink |
Center Drill, Drill, C-bore and/or C-sink for most common
screw sizes. |
|
Drill
and Tap |
Center Drill, Drill, C-sink (for larger holes) and Tap
most common screw sizes. |
Software
Patches and Updates
V10 Mastercam
Version X2
MR2
Double click on the file and follow the instructions. There is also
an Icon file for you toolbar.
Updates
for Mastercam HSM Performance Pack
(Requires Level 3 Mastercam and
Cimco HSM license)
Cimco Speed and feed
Calculator
(freeware)