Training Schedule

Now is an excellent time to attend a training class on Mastercam Cad/Cam Software.  We have recently updated all of our classes with new content and examples.  Our classes focus on the latest Mastercam Toolpath technologies and programming techniques.  These classes are an excellent way to reduce the learning curve and get users trained and up to speed quickly on Mastercam.  They contain useful information for the new user and the experienced user as well.

< 2017 >
June
Sun
Mon
Tue
Wed
Thu
Fri
Sat
May
May
May
May
1
  • Mastercam Mill – Advanced 3D Milling
    8:00 AM-4:30 PM
    05-31-2017-06-02-2017

    178 S Heritage Way, Pendleton, IN, United States

    178 S Heritage Way, Pendleton, IN, United States

    Description

    This is a 3-day class. This class is designed as an advanced 3D toolpath class including model preparation commands, boundary creation, and remachining. Toolpaths covered are: Dynamic OptiRough, OptiRest, Area Rough, Rough Parallel, Waterline, Blend, Spiral, Pencil and Hybrid toolpaths. We will also use Stock Model to find remaining stock and write optimized toolpaths. 

    Prerequisites: The student should have previously attended both 2D Milling Essentials and 3D Milling Essentials classes listed above. The student should be comfortable with all operations required to write 2D and basic 3D milling toolpaths, creating basic geometry, as well as with using Mastercam in general.

    NOTE: This class has recently been updated to include all of the latest 3D Dynamic Milling Toolpaths. If you are an experienced Mastercam user, but are not using the dynamic motion toolpaths, you should strongly consider attending this class to become familiar with the new toolpaths and programming techniques.

2
  • Mastercam Mill – Advanced 3D Milling
    8:00 AM-4:30 PM
    05-31-2017-06-02-2017

    178 S Heritage Way, Pendleton, IN, United States

    178 S Heritage Way, Pendleton, IN, United States

    Description

    This is a 3-day class. This class is designed as an advanced 3D toolpath class including model preparation commands, boundary creation, and remachining. Toolpaths covered are: Dynamic OptiRough, OptiRest, Area Rough, Rough Parallel, Waterline, Blend, Spiral, Pencil and Hybrid toolpaths. We will also use Stock Model to find remaining stock and write optimized toolpaths. 

    Prerequisites: The student should have previously attended both 2D Milling Essentials and 3D Milling Essentials classes listed above. The student should be comfortable with all operations required to write 2D and basic 3D milling toolpaths, creating basic geometry, as well as with using Mastercam in general.

    NOTE: This class has recently been updated to include all of the latest 3D Dynamic Milling Toolpaths. If you are an experienced Mastercam user, but are not using the dynamic motion toolpaths, you should strongly consider attending this class to become familiar with the new toolpaths and programming techniques.

3
4
5
  • Lathe 1 – 2x Lathe Essentials
    8:00 AM-4:30 PM
    06-05-2017-06-06-2017

    178 S Heritage Way, Pendleton, IN, United States

    178 S Heritage Way, Pendleton, IN, United States

    Description

    This is a 2-day class. For turning applications, this class is where it all starts. We cover basic part prep for turning applications, job setup, etc., how to import, create, clean up and modify geometry for turning purposes. Mastercam toolpaths covered: Facing, Drilling, Rough & Finish Turn, Grooving, Threading, and Cut-Off Operations.

    Prerequisites: This is an entry level class. There are no Mastercam prerequisites. However, the student should be familiar with general turning principles and their machine.

6
  • Lathe 1 – 2x Lathe Essentials
    8:00 AM-4:30 PM
    06-05-2017-06-06-2017

    178 S Heritage Way, Pendleton, IN, United States

    178 S Heritage Way, Pendleton, IN, United States

    Description

    This is a 2-day class. For turning applications, this class is where it all starts. We cover basic part prep for turning applications, job setup, etc., how to import, create, clean up and modify geometry for turning purposes. Mastercam toolpaths covered: Facing, Drilling, Rough & Finish Turn, Grooving, Threading, and Cut-Off Operations.

    Prerequisites: This is an entry level class. There are no Mastercam prerequisites. However, the student should be familiar with general turning principles and their machine.

7
  • Lathe 2 – C-axis Lathe Toolpaths
    8:00 AM-4:30 PM
    06-07-2017

    178 S Heritage Way, Pendleton, IN, United States

    178 S Heritage Way, Pendleton, IN, United States

    Description

    This is a 1-day class. This class focuses on C-axis Lathe Toolpaths in Mastercam. Toolpaths covered are: Face Contour, Cross Contour, C-axis Contour, Face drill, Cross drill and C-axis Drill.

    Prerequisites: Student should have attended Lathe 1 class above.

8
  • Lathe 3 – Y-axis Lathe Toolpaths
    8:00 AM-4:30 PM
    06-08-2017

    178 S Heritage Way, Pendleton, IN, United States

    178 S Heritage Way, Pendleton, IN, United States

    Description

    This is a 1-day class. This class focuses on basic milling toolpaths that can be used on a Y-axis Lathe. Toolpaths covered are: Drilling, Contour, Area Clearance, Peel Mill, Circle Mill and Thread milling applications.

    Prerequisites: The student should have attended Lathe 1 and Lathe 2 classes listed above.

9
10
11
12
  • Mastercam for SolidWorks 2D/3D
    8:00 AM-4:30 PM
    06-12-2017-06-15-2017

    178 S Heritage Way, Pendleton, IN, United States

    178 S Heritage Way, Pendleton, IN, United States

    Description

    Mastercam for SolidWorks 2D

    This is a 2-day class. We will cover basic Mastercam configuration, setup and parameters. Mastercam 2D toolpaths covered are: Facing, Drilling, 2D Contouring, Chamfering, Circle Toolpaths, HST Core Mill, Area Mill, Dynamic Core, Area, Rest and Contour Milling.

    Prerequisites: This is an entry level class. There are no Mastercam prerequisites. However, the student should be familiar with SolidWorks in general.

    Please Note: This class is for Mastercam Toolpaths only. The user must be familiar with SolidWorks prior to attending this class.

     

    Mastercam for SolidWorks 3D

    This is a 2-day class. Mastercam 3D toolpaths covered are: High-Speed 3D Area Mill, Core Mill, OptiArea, OptiCore, OptiRest, Horizontal Area Mill, Waterline, Raster, Pencil, Hybrid and Scallop Toolpaths.

    Prerequisites: The student should have previously attended the Mastercam for SolidWorks 2D Milling class listed above. Additionally, the student should be familiar with SolidWorks in general.

    Please Note: This class is for Mastercam Toolpaths only. The user must be familiar with SolidWorks prior to attending this class.

  • Mastercam Wire EDM – Recently Updated
    8:00 AM-4:30 PM
    06-12-2017-06-13-2017

    178 S Heritage Way, Pendleton, IN, United States

    178 S Heritage Way, Pendleton, IN, United States

    Description

    This is a 2-day class. We will cover basic Mastercam configuration, setup and user interface for Wire EDM, how to import, create and modify geometry to be wire cut. Mastercam toolpaths covered: 2-axis, 2-axis with taper and 4-axis toolpaths.

    Prerequisites: This is an entry level Wire EDM class. There are no Mastercam prerequisites. However, the student should be familiar with general wire EDM operation and their machine.

13
  • Mastercam for SolidWorks 2D/3D
    8:00 AM-4:30 PM
    06-12-2017-06-15-2017

    178 S Heritage Way, Pendleton, IN, United States

    178 S Heritage Way, Pendleton, IN, United States

    Description

    Mastercam for SolidWorks 2D

    This is a 2-day class. We will cover basic Mastercam configuration, setup and parameters. Mastercam 2D toolpaths covered are: Facing, Drilling, 2D Contouring, Chamfering, Circle Toolpaths, HST Core Mill, Area Mill, Dynamic Core, Area, Rest and Contour Milling.

    Prerequisites: This is an entry level class. There are no Mastercam prerequisites. However, the student should be familiar with SolidWorks in general.

    Please Note: This class is for Mastercam Toolpaths only. The user must be familiar with SolidWorks prior to attending this class.

     

    Mastercam for SolidWorks 3D

    This is a 2-day class. Mastercam 3D toolpaths covered are: High-Speed 3D Area Mill, Core Mill, OptiArea, OptiCore, OptiRest, Horizontal Area Mill, Waterline, Raster, Pencil, Hybrid and Scallop Toolpaths.

    Prerequisites: The student should have previously attended the Mastercam for SolidWorks 2D Milling class listed above. Additionally, the student should be familiar with SolidWorks in general.

    Please Note: This class is for Mastercam Toolpaths only. The user must be familiar with SolidWorks prior to attending this class.

  • Mastercam Wire EDM – Recently Updated
    8:00 AM-4:30 PM
    06-12-2017-06-13-2017

    178 S Heritage Way, Pendleton, IN, United States

    178 S Heritage Way, Pendleton, IN, United States

    Description

    This is a 2-day class. We will cover basic Mastercam configuration, setup and user interface for Wire EDM, how to import, create and modify geometry to be wire cut. Mastercam toolpaths covered: 2-axis, 2-axis with taper and 4-axis toolpaths.

    Prerequisites: This is an entry level Wire EDM class. There are no Mastercam prerequisites. However, the student should be familiar with general wire EDM operation and their machine.

14
  • Mastercam for SolidWorks 2D/3D
    8:00 AM-4:30 PM
    06-12-2017-06-15-2017

    178 S Heritage Way, Pendleton, IN, United States

    178 S Heritage Way, Pendleton, IN, United States

    Description

    Mastercam for SolidWorks 2D

    This is a 2-day class. We will cover basic Mastercam configuration, setup and parameters. Mastercam 2D toolpaths covered are: Facing, Drilling, 2D Contouring, Chamfering, Circle Toolpaths, HST Core Mill, Area Mill, Dynamic Core, Area, Rest and Contour Milling.

    Prerequisites: This is an entry level class. There are no Mastercam prerequisites. However, the student should be familiar with SolidWorks in general.

    Please Note: This class is for Mastercam Toolpaths only. The user must be familiar with SolidWorks prior to attending this class.

     

    Mastercam for SolidWorks 3D

    This is a 2-day class. Mastercam 3D toolpaths covered are: High-Speed 3D Area Mill, Core Mill, OptiArea, OptiCore, OptiRest, Horizontal Area Mill, Waterline, Raster, Pencil, Hybrid and Scallop Toolpaths.

    Prerequisites: The student should have previously attended the Mastercam for SolidWorks 2D Milling class listed above. Additionally, the student should be familiar with SolidWorks in general.

    Please Note: This class is for Mastercam Toolpaths only. The user must be familiar with SolidWorks prior to attending this class.

15
  • Mastercam for SolidWorks 2D/3D
    8:00 AM-4:30 PM
    06-12-2017-06-15-2017

    178 S Heritage Way, Pendleton, IN, United States

    178 S Heritage Way, Pendleton, IN, United States

    Description

    Mastercam for SolidWorks 2D

    This is a 2-day class. We will cover basic Mastercam configuration, setup and parameters. Mastercam 2D toolpaths covered are: Facing, Drilling, 2D Contouring, Chamfering, Circle Toolpaths, HST Core Mill, Area Mill, Dynamic Core, Area, Rest and Contour Milling.

    Prerequisites: This is an entry level class. There are no Mastercam prerequisites. However, the student should be familiar with SolidWorks in general.

    Please Note: This class is for Mastercam Toolpaths only. The user must be familiar with SolidWorks prior to attending this class.

     

    Mastercam for SolidWorks 3D

    This is a 2-day class. Mastercam 3D toolpaths covered are: High-Speed 3D Area Mill, Core Mill, OptiArea, OptiCore, OptiRest, Horizontal Area Mill, Waterline, Raster, Pencil, Hybrid and Scallop Toolpaths.

    Prerequisites: The student should have previously attended the Mastercam for SolidWorks 2D Milling class listed above. Additionally, the student should be familiar with SolidWorks in general.

    Please Note: This class is for Mastercam Toolpaths only. The user must be familiar with SolidWorks prior to attending this class.

16
17
18
19
  • Mastercam Mill – 2D Milling Essentials
    8:00 AM-4:30 PM
    06-19-2017-06-21-2017

    178 S Heritage Way, Pendleton, IN, United States

    178 S Heritage Way, Pendleton, IN, United States

    Description

    This is a 3-day class. This class covers basic Mastercam configuration, setup and user interface, how to import, create, clean up and modify geometry for machining purposes. Mastercam toolpaths covered: Facing, Drilling, 2D Contouring, Chamfering, Circle Toolpaths, HST Core Mill, Area Mill, Dynamic Core, Area, Rest and Contour Milling.

    Prerequisites: There are no Mastercam prerequisites. However, the student should be familiar with general machining principles and their machine.

    NOTE: This class has recently been updated to include all of the latest 2D Dynamic Milling Toolpaths. If you are an experienced Mastercam user, but are not using the dynamic motion toolpaths, you should strongly consider attending this class to become familiar with the new toolpaths and programming techniques.

20
  • Mastercam Mill – 2D Milling Essentials
    8:00 AM-4:30 PM
    06-19-2017-06-21-2017

    178 S Heritage Way, Pendleton, IN, United States

    178 S Heritage Way, Pendleton, IN, United States

    Description

    This is a 3-day class. This class covers basic Mastercam configuration, setup and user interface, how to import, create, clean up and modify geometry for machining purposes. Mastercam toolpaths covered: Facing, Drilling, 2D Contouring, Chamfering, Circle Toolpaths, HST Core Mill, Area Mill, Dynamic Core, Area, Rest and Contour Milling.

    Prerequisites: There are no Mastercam prerequisites. However, the student should be familiar with general machining principles and their machine.

    NOTE: This class has recently been updated to include all of the latest 2D Dynamic Milling Toolpaths. If you are an experienced Mastercam user, but are not using the dynamic motion toolpaths, you should strongly consider attending this class to become familiar with the new toolpaths and programming techniques.

21
  • Mastercam Mill – 2D Milling Essentials
    8:00 AM-4:30 PM
    06-19-2017-06-21-2017

    178 S Heritage Way, Pendleton, IN, United States

    178 S Heritage Way, Pendleton, IN, United States

    Description

    This is a 3-day class. This class covers basic Mastercam configuration, setup and user interface, how to import, create, clean up and modify geometry for machining purposes. Mastercam toolpaths covered: Facing, Drilling, 2D Contouring, Chamfering, Circle Toolpaths, HST Core Mill, Area Mill, Dynamic Core, Area, Rest and Contour Milling.

    Prerequisites: There are no Mastercam prerequisites. However, the student should be familiar with general machining principles and their machine.

    NOTE: This class has recently been updated to include all of the latest 2D Dynamic Milling Toolpaths. If you are an experienced Mastercam user, but are not using the dynamic motion toolpaths, you should strongly consider attending this class to become familiar with the new toolpaths and programming techniques.

22
  • Mastercam Mill – 3D Milling Essentials
    8:00 AM-4:30 PM
    06-22-2017-06-23-2017

    178 S Heritage Way, Pendleton, IN, United States

    178 S Heritage Way, Pendleton, IN, United States

    Description

    This is a 2-day class. This class is designed as a basic introductory 3D toolpath class. Topics covered are: Importing 3D models, basic model prep and creating geometry required for machining. Mastercam toolpaths covered are: HST 3D Area Mill, Core Mill, Horizontal Area Mill, Waterline, Raster and Scallop Toolpaths.

    Prerequisites: The student should have previously attended the 2D Milling Essentials class listed above. The student should be comfortable with all operations required to write 2D milling toolpaths, creating basic geometry, and using Mastercam in general.

    NOTE: This class has recently been updated to include all of the latest 2D Dynamic Milling Toolpaths. If you are an experienced Mastercam user, but are not using the dynamic motion toolpaths, you should strongly consider attending this class to become familiar with the new toolpaths and programming techniques.

23
  • Mastercam Mill – 3D Milling Essentials
    8:00 AM-4:30 PM
    06-22-2017-06-23-2017

    178 S Heritage Way, Pendleton, IN, United States

    178 S Heritage Way, Pendleton, IN, United States

    Description

    This is a 2-day class. This class is designed as a basic introductory 3D toolpath class. Topics covered are: Importing 3D models, basic model prep and creating geometry required for machining. Mastercam toolpaths covered are: HST 3D Area Mill, Core Mill, Horizontal Area Mill, Waterline, Raster and Scallop Toolpaths.

    Prerequisites: The student should have previously attended the 2D Milling Essentials class listed above. The student should be comfortable with all operations required to write 2D milling toolpaths, creating basic geometry, and using Mastercam in general.

    NOTE: This class has recently been updated to include all of the latest 2D Dynamic Milling Toolpaths. If you are an experienced Mastercam user, but are not using the dynamic motion toolpaths, you should strongly consider attending this class to become familiar with the new toolpaths and programming techniques.

24
25
26
27
28
29
30
July